Download
The latest version of Just In Mac Pro 2026 is freely available for Download via the dedicated solution page. Current customers (with account credentials) may also use the download area in the ToolsOnAir Support System.
If you are using SDI cards from Blackmagic Design or AJA, please ensure that the driver version compatible with your macOS version has been installed in advance and that a signal is present. Please refer to the compatibility matrix below.
Installation
Extract the downloaded ZIP archive and open the disk image. The Just In Mac Pro 2026 installation disk image (.dmg) will appear on your screen as shown below:
Installation of Apple Pro Video Formats
Please ensure to download and install the Apple Pro Video Formats from Apple’s website, as they provide support for the listed codecs (see screenshot below) used to capture files with Just In Mac Pro 2026, to ensure compatibility with professional video workflows.
If this has been done previously, then no action is required. The Apple Pro Video Formats codecs can be found at: “/Library/Video/Professional Video Workflow Plug-Ins”.
Compatibility Matrix for Just In Mac Pro 2026.x
Important: The Just In Mac Pro 2026 solution is optimized exclusively for Apple silicon hardware (M1-M5) to provide you with the best performance and experience.
By fully transitioning to the Apple silicon platform, we ensure optimal performance, stability, and compatibility with the latest advancements.
If you are planning to deploy Just In Mac Pro on INTEL-based Macs (MacPro7,1 or Macmini8,1) please use version 6.5 or version 2025.1!
Nevertheless, we will, of course, continue to support our customers who still have certified Intel-based Macs running qualified versions of Just In Mac Pro.
The specific hardware setup, third-party drivers, software and operating systems should always be tested thoroughly with the free of charge demo software provided by ToolsOnAir before the final installation.
Operating System
The supported macOS versions are (recommended macOS versions are displayed in Bold)
macOS 26.x (“Tahoe”) - recommended for daily operations
macOS 15.7.x (“Sequoia”) - recommended for daily operations
macOS 14.8.x (“Sonoma”) - please update to macOS Sequoia or higher!
Administrator account required for installation, configuration and to collect logs.
Date and Time Format
Please verify that your macOS Date & Time settings are compatible with the Gregorian Calendar format (Gregorian date formats include the following: ddmonyy, ddmonyyyy, mm/dd/yy, or mm/dd/yyyy). Using the Gregorian calendar ensures consistency and accuracy in the Date header, avoiding misinterpretation, synchronisation and activation errors. This is crucial for the Schedule mode to fetch the correct Start/Stop Date and Time information.
Memory/RAM
We recommend installing at least 16 GB on the machine running the Just In Engine application on Apple silicon-based Macs (M1-M5).
Mac models and macOS versions supported by Just In Mac Pro 2026.x:
NOTE: Version 2026 runs exclusively on Apple silicon hardware. If you plan to deploy Just In Mac Pro on INTEL-based Macs (MacPro7,1 or Macmini8,1) please use version 6.5 or version 2025.1 instead!
The Apple silicon based models listed below are the ones regularly tested in our labs. If your computer does not appear in the list below, and it is an Apple silicon computer, you can assume that the software will work without any problems. Nevertheless, we recommend that you contact us if you are in any doubt so that we can check your configuration together.
Supported Apple silicon models: | ||
Mac Model (Apple silicon M1) | Model Identifier | macOS* |
Mac Studio M1 Max | Mac13,1 | 15.7.x, 26.x |
Mac Studio M1 Ultra | Mac13,2 | 15.7.x, 26.x |
Mac mini (M1, 2020) | Macmini9,1 | 15.7.x, 26.x |
Mac Model (Apple silicon M2) | Model Identifier | macOS* |
Mac Pro (2023) - EOL/EOS! | Mac14,8 | 15.7.x, 26.x |
Mac Studio M2 Max | Mac14,13 | 15.7.x, 26.x |
Mac Studio M2 Ultra | Mac14,14 | 15.7.x, 26.x |
Mac mini (M2, 2023) | Mac14,3 | 15.7.x, 26.x |
Mac mini (M2 Pro, 2023) | Mac14,12 | 15.7.x, 26.x |
Mac Model (Apple silicon M3) | Model Identifier | macOS* |
Mac Studio M3 Ultra | Mac15,14 | 15.7.x, 26.x |
iMac (24”, M3, 2023) | Mac15,4, Mac15,5 | 15.7.x, 26.x |
Mac Model (Apple silicon M4) | Model Identifier | macOS* |
Mac Studio M4 Max | Mac16,9 | 15.7.x, 26.x |
Mac mini (M4, 2024) | Mac16,10 | 15.7.x, 26.x |
Mac mini (M4 Pro, 2024) | Mac16,11 | 15.7.x, 26.x |
iMac (M4, 2024) | Mac16,2, Mac16,3 | 15.7.x, 26.x |
Mac Model (Apple silicon M5) | Model Identifier | macOS* |
MacBook Pro (14”, M5, 2025) | Mac17,2 | 26.x |
MacBook Pro (14”, M5 Pro/Max, 2026) | Mac17,9, Mac17,7 | 26.x |
MacBook Pro (16”, M5 Pro/Max, 2026) | Mac17,8, Mac17,6 | 26.x |
*Legend: 15.7.x = macOS Sequoia, 26.x = macOS Tahoe.
IMPORTANT: macOS Sonoma= please update to macOS Sequoia or macOS Tahoe!
NOTE: Please verify that the available Media Engines in all Apple silicon based models meet your recording requirements, before buying a Just In Mac Pro 2026 license. You can test the fully feature enabled Just In Mac Pro 2026 solution for free by downloading the trial version from the related solution page. The trial version will add a ToolsOnAir watermark to the recordings. By licensing Just In Mac Pro 2026 the watermark will automatically be removed.
All supported Apple silicon Mac models: min. of 16 GB of RAM highly recommended!
Add a comment
Installation of the Just In Mac Pro 2025.x software components
Drag & Drop both Just Control.app and Just In Engine.app to the Applications folder and if desired, add both applications to the Dock.
AirDrop & Handoff / AirPlay Receiver
Before you run the Just In Mac Engine application for the first time, please ensure that the “AirPlay Receiver” option is disabled, as it interferes with the internal network communication between the Just In Engine and Just Control applications.
IMPORTANT: Allow “Local Network” access within macOS Sequoia (15.x.x) and macOS Tahoe (26.x.x)
The new Local Network Security feature in macOS Sequoia (15.x.x) and macOS Tahoe (26.x.x) enhances privacy and control by allowing users to manage which apps can access their local network. This feature addresses concerns over unmonitored network access, providing an extra layer of security by ensuring that only trusted applications have access to local network resources, such as printers, file-sharing devices, and other computers. In macOS Sequoia, users are prompted when an application attempts to access the local network for the first time, enabling them to allow or deny access (“System Settings → Privacy & Security → Local Network”).
When running the Just In Engine and Just Control applications for the first time on macOS Sequoia you will be asked to allow it to discover and connect to devices or other applications on your network. Please click on the “Allow” button to ensure that the communication between the Just In Engine and Just Control applications is guaranteed.
 |  |
|---|
To double-check the communication status with devices or applications on your local network, go to “System Settings → Privacy & Security → Local Network” and ensure that both Just In Engine and Just Control are enabled.
Setup (see section above)
Go to the Applications folder and open the Just In Engine application. Press the “Ok” button and enter the Administrator Password.
The diagnostic window of Just In Engine will open, showing the message "No active channels, please start Just Control to configure channels".
Now go back to the Applications folder and open the Just Control Application. You may want to allow the application access to the macOS Calendar application (Schedule Mode). This can also be done/changed later. The Just Control login window appears.
You can continue here by simply pressing the “Login” button without entering any password (can be changed later). Next, you will be asked for the IP-Address of the machine. If the given IP-Address (IP-Address of your current machine) is correct, move on by pressing the “Connect” button. If you expect that the network and/or the IP-Address might change frequently, please use “127.0.0.1” instead, while using the appliciations locally.
Then the Configuration Wizard appears, which will help to finalize the setup. If your are upgrading from a former version (e.g. 6.5 or 2025.x) the video mode settings will be kept from the original install. If you are performing a fresh install, then the Configuration Wizard wil dsiplay the “Auto” (Automatic Signal Detection) setting.
The Configuration Wizard automatically detects your installed video devices (AJA, Blackmagic Design - specific driver installation required). Then you can leave it in “Auto” mode or choose the preferred manual video mode (e.g., 1080i2997), the Device and Channel Name, the Default Storage Path and you can pre-select Capture Presets. Complete the configuration by pressing the Configure button.
All available Channels will now be automatically connected, and you can start to use Just In Mac Pro. Settings can be changed within the Channel Inspector on the right side of the Just Control User Interface. Recording can be started by pressing the Recording button, which will be available by moving the mouse into the dedicated Channel Viewer.
